Palm kernel fruit fiber reinforced gypsum-cement based wall panels: It’s physical and mechanical characteristics

Document Type : Original Research Paper

Authors

1 Building Department, Federal Polytechnic, Idah, Kogi State, Nigeria

2 Building Department, Faculty of Environmental Studies, University of Uyo, AkwaIbom State, Nigeria

Abstract

Agricultural waste fibers have been found to be suitable as reinforcement in cement-based composites, but studies on oil palm fiber as reinforcement in gypsum-cement wall panels are scarce. A mixture of two equal weights of gypsum and cement, with water-binder ratios of 0.45 and 0.55 were prepared. In each mix a varying percentage of fiber contents of 2%, 3% and 4% by weight of the binders were added. The properties of the wall panels were determined from cast specimen sizes of 100x 100 x 40 mm for density, moisture content and water absorption; 160 x 40 x 40mm for compressive strength, and 650 x 100 x 25 mm for bending strength. The specimens were cured in water and tested at ages of 3, 7, 14, 21, and 28 days. The results of density of the wall panels were within the range of 1634–1742 kg/m3, while the moisture content range of 3.30–8.45%, and the water absorption varies from 5 to 12%. The compressive strengths were found within the range of 1.92–5.20N/mm2 and, generally, decreases with the increasing percentage of fiber contents, but increased with curing age. The bending strength falls within the range of 2.04–4.13 N/mm2that increases with curing age and slightly increased with fiber content. It is concluded that oil palm fiber reinforced gypsum-cement wall panels are suitable as wall element.

Keywords


Aggarwal, L. K. (1995). Bagasse-Reiforced Cement Composite. Cement Concrete Comp., 17, 107-112.
Adams, C. (2002). Are 150 people killed each year by falling coconuts?The Straight Dope. Retrieved April 14, 2013. Adedeji, Y.M. D. and Ajayi, B. (2008). Cost Effective Composite Building Panels for Walls and Ceiling in Nigeria. (Paper presented at the 11th International Inorganic-bonded Fiber Composites Conference (IIBCC), Madrid – Spain)
Adesanya, D. A. (1993). Effects of Particle Dimension on the Properties of Resin-Bonded Corncob particle Boards. Nig. J Tech Res., 3, 119 -125.
Asasutjarit, C., Hirunlabh, J., Charoenvai, S. and Zeghmati, B. (2007). Development of coconut coir based Lightweight cement board. Constr Build Mater., 21, 277-288.
Audu-War and Obam S. O. (2006). The use of Sisal shell fibres in sandcrete composites. NJISS, 5(4), 1-3.
Barry, R. (1999). Barry the construction of buildings 4.(London: Blackwell science)
Bentur, A., Kovler, K. and Goldman, A. (1994). Gypsum of improved Performance Using Blends with Portland Cement and Silica Fume. Adv. in Cement Res., 6(23), 109–116.
BS 5669-1 (1989). Particle board method of sampling, conditioning and test. London, BritishStandard Institution..
BS EN 197–1 (2009). Cement Composition, Specification and Conformity Criteria for Common cements. London, British Standard Institution.
Duggal, S. K. (2003). Building materials. (New Delhi: New Age International Limited Publishers)
Fadhadli, Z. (1989). Properties of cement Sheets reinforced with Coconut Fibre. Dissertation, Universiti Teknologi Malaysia.
Hannant, D. (1994). Fibre-Reinforced cements and concretes (InJ. M. Illston (Ed.), Construction Materials: Their nature and behavior (pp. 359-364). London: E & FN Spon.)
Hollaway, L. (1993). Polymer and polymer composites for civil and structural engineering. (Glasgow: Blackie academic and professional)
Mazlan, D. and Abdul Awal, A. S. M. (2012). Properties of Cement Composites containing Oil Palm Stem as Fiber Reinforcement. Mjce., 24(2), 107-117.
Mohd–Hisbany, B. (2005). Coconut fibre reinforced wall paneling system. Dissertation, University of Technology, Malaysia.
Nigerian Industrial Standard (NIS) 444 -1 (2003). Cement Composition, Specification and Conformity Criteria for Common Cement Designation. Nigeria, Standard organization..
Nigerian Industrial Standard (NIS) 587 (2007). Nigerian Industrial Standard Method of Testing Block. Nigeria, Standard Organization of Nigeria.
Olusola, K. O. (2005). Factors Affecting Compressive Strength and Elastic Properties of Laterized Concrete. Dissertation, Obafemi Awolowo University, Ile-Ife, Nigeria.
Seeley, I. H. (2002). Building Construction. (London:Longman Publishers)
Shetty, M. S. (2010). Concrete Technology Theory and Practice. (New Delhi: S. Chand and Company Ltd.)
Swamy, R. N. (1998). Vegetable Fibre Reinforced Composite: a false dream or Portlandreality. (Paper presented at the second international RILEM symposium, Chapman and Hall, London)
Toledo-Filho, R.D., Scrivener , K., England, G.L. and Ghavami, K. (2002). Durability of Alkali-sensitive Sisal and Coconut Fibres in Cement Mortar Composites. Cement Concrete Comp., 22, 127-143.
Zhu, W.H., Tobias, B.C., Counts, R.S.P. and Langfors, G. (1994). Air-cures banana-fiber reinforced cement Composites. Cement Concrete Comp., 16, 3-8.
Rowell, R. M. (1994). Potentials for jute and allied fibres. (Paper presented at the international Jute and Allied Fibre Symposium and Bio composites and Blends, New Delhi, India)