Collection and recycle bin location-allocation problem in solid waste management: A review

Document Type : Review Paper

Authors

1 M. Tech Scholar, Department of Civil Engineering, National Institute of Technology, Agartala P.O.: Former Tripura Engineering College Barjala, Jirania 799046, Tripura (W), India

2 Assistant Professor, Department of Civil Engineering, National Institute of Technology, Agartala P.O.: Former Tripura Engineering College Barjala, Jirania 799046, Tripura (W, India

3 Registrar (I/C), National Institute of Technology, Agartala P.O.: Former Tripura Engineering College Barjala, Jirania 799046, Tripura (W), India

Abstract

This comprehensive work explores the research performed in
optimization of the collection bin and in recycle bin location-allocation issues in solid
waste management. Although the collection phase of solid waste management accounts
for a significant proportion of the municipal budget, it has attracted only limited
attention of the researchers. Optimization of the collection bin and recycle bin location-
allocation problems in solid waste management can be advantageous with respect to bin
access to every individual person of municipality, reduction in the numbers of open
dumping yards, considerable profit if the recycled products are properly processed, and
as an effort toward sustainable and green world. Hence, the topic of interest should be
pursued, especially in developing countries, to enable development of a cost-efficient and sustainable solid waste management system.

Keywords

References

Badran, M.F. and El-Haggar, S.M. (2006). Optimization of municipal solid waste management in Port Said – Egypt. Waste Manage., 26(5), 534-545, ISSN 0956-053X, http://dx.doi.org/10.1016/j.wasman.2005.05.005.
Bautista, J. and Pereira, J. (2006). Modelling the problem of locating collection areas for urban waste management. An application to the metropolitan area of Barcelona. Omega, 34(6), 617-629, ISSN 0305-0483, http://dx.doi.org/10.1016/j.omega.2005.01.013.
Beaumont, J. R. (1987). Location-allocation models and central place theory. (In A. Ghosh and G. Rushton, (Eds.), Spatial analysis and location-allocation model (pp. 21-54.). New York: Von Nostrand Reinhold Co.).
Chang, N. and Wei, Y.L. (1999). Strategic Planning of Recycling Drop-Off Stations and Collection Network by Multiobjective Programming. Environmental Manage., 24 (2), 247-263, ISSN 1432-1009, DOI: 10.1007/s002679900230.
Coutinho-Rodrigues, J., Tralhão, L. and Alçada-Almeida, L. (2012). A bi-objective modeling approach applied to an urban semi-desirable facility location problem.Eur. J. Oper. Res., 223(1), 203-213, ISSN 0377-2217, http://dx.doi.org/10.1016/j.ejor.2012.05.037.
Di Felice, P. (2014a). Integration of Spatial and Descriptive Information to Solve the Urban Waste Accumulation Problem. Procedia - Social and Behavioral Sciences, 147, 182-188, ISSN 1877-0428, http://dx.doi.org/10.1016/j.sbspro.2014.07.150.
Di Felice, P. (2014b). Integration of Spatial and Descriptive Information to Solve the Urban Waste Accumulation Problem: A Pilot Study. Procedia - Social and Behavioral Sciences, 147, 592-597, ISSN 1877-0428, http://dx.doi.org/10.1016/j.sbspro.2014.07.636.
Erkut, E., Karagiannidis, A., Perkoulidis, G. and Tjandra, S.A. (2008). A multicriteria facility location model for municipal solid waste management in North Greece.Eur. J. Oper. Res., 
187(3), 1402-1421, ISSN 0377-2217, http://dx.doi.org/10.1016/j.ejor.2006.09.021.
Farhan, B. and Murray, A.T. (2006). Distance decay and coverage in facility location planning.Ann. Regional Sci., 40(2), 279-295, ISSN 1432-0592, DOI: 10.1007/s00168-005-0041-7.
Flahaut, B., Laurent, M-A. and Thomas, I. (2002). Locating a Community Recycling Center within a Residential Area: A Belgian Case Study. Prof. Geogr., 54(1), 67-82, ISSN 0033-0124, http://dx.doi.org/10.1111/0033-0124.00316.
Gautam, A. K. and Kumar, S. (2005). Strategic planning of recycling options by multi-objective programming in a GIS environment.Clean Technol. Envir., 7(4), 306–316. DOI: 10.1007/s10098-005-0006-7.
Ghiani, G., Laganà, D., Manni, E. and Triki, C. (2012). Capacitated location of collection sites in an urban waste management system. Waste Manage., 32(7), 1291-1296, ISSN 0956-053X, http://dx.doi.org/10.1016/j.wasman.2012.02.009.
Ghiani, G., Manni, A., Manni, E. and Toraldo, M. (2014). The impact of an efficient collection sites location on the zoning phase in municipal solid waste management. Waste Manage., 34(11), 1949-1956, ISSN 0956-053X, http://dx.doi.org/10.1016/j.wasman.2014.05.026.
González-Torre, P.L., Adenso-Dı́az, B. and Ruiz-Torres, A. (2003). Some comparative factors regarding recycling collection systems in regions of the USA and Europe.J. Environ. Manage., 69(2), 129-138, ISSN 0301-4797, http://dx.doi.org/10.1016/S0301-4797(03)00109-9.
Gutberlet, J.(2003). Cities, consumption, and the generation of waste. Aviso, 11, 12-20.
Hage, O., Söderholm, P. and Berglund, C. (2009). Norms and economic motivation in household recycling: Empirical evidence from Sweden.Resour. Conserv. Recy., 53(3), 155-165, ISSN 0921-3449, http://dx.doi.org/10.1016/j.resconrec.2008.11.003.
Kao, J-J and Lin, T-I (2002). Shortest Service Location Model for Planning Waste Pickup Locations. J. Air Waste Manage., 52(5), 585-592, ISSN 2162-2906, http://dx.doi.org/10.1080/10473289.2002.10470807 .
Kao, J., Wen, L. and Liu, K. (2010). Service Distance and Ratio-Based Location-Allocation Models for Siting Recycling Depots. J. Environ. Eng.-ASCE, 136(4), 444–450, ISSN 1943-7870, http://dx.doi.org/10.1061/(ASCE)EE.1943-7870.0000170.
Kao, J., Tsai, Y. and Huang, Y. (2013). Spatial Service Location-Allocation Analysis for Siting Recycling Depots. J. Environ. Eng.-ASCE, 139(8), 1035–1041, ISSN 1943-7870, http://dx.doi.org/10.1061/(ASCE)EE.1943-7870.0000720.
Karadimas, N.V. and Loumos, V.G. (2008). GIS-based modelling for the estimation of municipal solid waste generation and collection. Waste Manage. Res., 26(4), 337-346, ISSN 0734–242X. DOI: 10.1177/0734242X07081484.
Lee, S. and Paik, H.S. (2011). Korean household waste management and recycling behavior.Build Environ., 46(5), 1159-1166, ISSN 0360-1323, http://dx.doi.org/10.1016/j.buildenv.2010.12.005.
Lin, H.Y. and Chen, G.H. (2009). Regional optimization model for locating supplemental recycling depots, Waste Manage., 29(5), 1473-1479, ISSN 0956-053X, http://dx.doi.org/10.1016/j.wasman.2008.10.012.
Martin, M., Williams, I.D. and Clark, M. (2006). Social, cultural and structural influences on household waste recycling: A case study.Resour. Conserv. Recy., 48(4), 357-395, ISSN 0921-3449, http://dx.doi.org/10.1016/j.resconrec.2005.09.005.
Miafodzyeva, S. and Brandt, N. (2013). Recycling Behaviour Among Householders: Synthesizing Determinants Via a Meta-analysis.Waste and Biomass Valorization, 4(2), 221-235, ISSN 1877-265X, DOI: 10.1007/s12649-012-9144-4.
Nithya, R., Velumani, A. and Kumar, S. R. R. S. (2012). Optimal Location and Proximity Distance of Municipal Solid Waste Collection Bin Using GIS: a Case Study of Coimbatore City. WSEAS Transactions on environment and development, 8(4), 107-119, ISSN 2224-3496.
Parrot, L., Sotamenou, J. and Kamgnia Dia, B. (2009). Municipal solid waste management in Africa: Strategies and livelihoods in Yaoundé, Cameroon. Waste Manage., 29(2), 986-995, ISSN 0956-053X, http://dx.doi.org/10.1016/j.wasman.2008.05.005.
Rada, E.C., Ragazzi, M. and Fedrizzi, P. (2013). Web-GIS oriented systems viability for municipal solid waste selective collection optimization in developed and transient economies. Waste Manage., 33(4), 785-792, ISSN 0956-053X, http://dx.doi.org/10.1016/j.wasman.2013.01.002.
Sidique, S.F., Lupi, F. and Joshi, S.V. (2010). The effects of behavior and attitudes on drop-off recycling activities.Resour. Conserv. Recy., 54(3), 163-170, ISSN 0921-3449, http://dx.doi.org/10.1016/j.resconrec.2009.07.012.
Suttibak, S. and Nitivattananon, V. (2008). Assessment of factors influencing the performance of solid waste recycling programs.Resour. Conserv. Recy., 53(1–2), 45-56, ISSN 0921-3449, http://dx.doi.org/10.1016/j.resconrec.2008.09.004.
Teixeira, C.A., Avelino, C., Ferreira, F. and Bentes, I. (2014), Statistical analysis in MSW collection performance assessment. Waste Manage., 34(9), 1584-1594, ISSN 0956-053X, http://dx.doi.org/10.1016/j.wasman.2014.04.007.
Tralhão, L., Coutinho-Rodrigues J. and Alçada-Almeida, L. (2010). A multiobjective modeling approach to locate multi-compartment containers for urban-sorted waste. Waste Manage., 30(12), 2418-2429, ISSN 0956-053X, http://dx.doi.org/10.1016/j.wasman.2010.06.017.
Valeo, C., Baetz, B. and Tsanis, I. (1998). Location of Recycling Depots with GIS. J. Urban Plan. Dev. Div., 124(2), 93-99, ISSN: 1943-5444, http://dx.doi.org/10.1061/(ASCE)0733-9488(1998)124:2(93).
Troschinetz, A.M. and Mihelcic, J.R. (2009). Sustainable recycling of municipal solid waste in developing countries. Waste Manag., 29(2), 915-23. ISSN 0956-053X, http://dx.doi.org/10.1016/j.wasman.2008.04.016. Vijay, R., Gupta, A., Kalamdhad, A.S. and Devotta, S. (2005).Estimation and allocation of solid waste to bin through geographical information systems.Waste Manag. Res., 23(5), 479-484, ISSN 0734–242X. DOI: 10.1177/0734242X05057763.
Zamorano, M., Molero, E., Grindlay, A., Rodríguez, M.L., Hurtado, A. and Calvo, F.J. (2009). A planning scenario for the application of geographical information systems in municipal waste collection: A case of Churriana de la Vega (Granada, Spain). Resour. Conserv. Recy., 54(2), 123-133, ISSN 0921-3449, http://dx.doi.org/10.1016/j.resconrec.2009.07.001.
Zia, H. and Devadas, V. (2008), Urban solid waste management in Kanpur: Opportunities and perspectives, Habitat Int., 32(1), 58-73, ISSN 0197-3975, http://dx.doi.org/10.1016/j.habitatint.2007.08.001.
Pollution
Volume 1, Issue 2 - Serial Number 2
April 2015
Pages 175-191

Files

Share

How to cite

Statistics