Capability of Reused Waste from Aluminum Industry (Red Mud) in Iran to Improve Compressive Strength of Loose Soil

Document Type : Original Research Paper

Authors

School of Environment, College of Engineering, University of Tehran, Tehran, Iran

Abstract

Jajarm Alumina Plant, the only Alumina powder producer in Iran, generates 500,000 tons of red mud annually. The commonest method for final disposal of red mud in Iran is Tailing dam which is neither cost-effective nor environmentally-friendly. The main objective of this study is to evaluate the possibility of red mud recovery to be used for stabilization of loose soils. Red mud samples have been collected from tailing dam of Jajarm Alumina Plant to be characterized, using X-Ray Fluorescence (XRF). The soil stabilizer has been made by mixing red mud, steel slag, sodium metasilicate, and sodium hydroxide. In order to study the effect of soil stabilizer, five soil samples have been prepared which contain clay, sand, and wind-blown sand ranging from zero to 4 millimeters. Findings show that adding soil stabilizer with red mud significantly enhances compressive strength of soil samples (4.2, 18.2, 5.4, 4, and 4.1 in S1 to S5 samples, respectively). Also the results demonstrate that the red mud, produced from Aluminum industry in Iran, might be successfully used to stabilize loose soils, thereby enhancing their compressive characteristics, reducing environmental issues associated with uncontrolled disposal of such wastes as well as promoting integrated solid waste management strategies.

Keywords

References

Abdulvaliyev, R.A., Akcil, A., Gladyshev, S.V., Tastanov, E.A., Beisembekova, K.O., Akhmadiyeva, N.K. and Deveci, H. (2015). Gallium and vanadium extraction from red mud of Turkish alumina refinery plant: Hydrogarnet process. Hydrometallurgy, 157; 72-77.
Afrin, H. (2017). A Review on Different Types Soil Stabilization Techniques. Int. J. Transp. Eng. Technol., 3(2); 19-24.
ASTM (2006).  ASTM D2166-06, Standard Test Method for Unconfined Compressive Strength of Cohesive Soil. ASTM International, West Conshohocken, PA, United States.
Borra, C.R., Pontikes, Y., Binnemans, K. and Gerven, T.V. (2015). Leaching of rare earths from bauxite residue (red mud). Miner. Eng., 76; 20-27.
Borra, C.R., Mermans, J., Blanpain, B., Pontikes, Y., Binnemans, K. and Van Gerven, T. (2016). Selective recovery of rare earths from bauxite residue by combination of sulfation, roasting and leaching. Miner. Eng., 92; 151-159.
Cao, S., Ma, H., Zhang, Y., Chen, X., Zhang, Y. and Zhang, Y. (2013). The phase transition in Bayer red mud from China in high caustic sodium aluminate solutions. Hydrometallurgy, 140; 111-119.
Carneiro, J., Capela, M.N., Tobaldi, D.M., Novais, R.M., Seabra, M.P. and Labrincha, J.A. (2018). Red mud and electroplating sludge as coloring agents of distinct glazes: The influence of heat treatment. Mater. Lett., 223; 166-169.
Celik, S. (2017). An Experimental Investigation of Utilizing Waste Red Mud in Soil Grouting. KSCE J. Civ. Eng., 21(4); 1191-1200.
Chehreh Chelgani, S. and Jorjani, E. (2009). Artificial neural network prediction of Al2O3 leaching recovery in the Bayer process—Jajarm alumina plant (Iran). Hydrometallurgy, 97; 105-110.
Deelwal, K., Dharavath, K. and Kulshreshtha, M. (2014). Stabilization of red mud by lime, gypsum and investigating its possible use as a geotechnical material in the civil construction. Int. J. Adv. Eng. Technol., 7(4); 1238-1244.
Deng, G., Li, K., Gu, Z., Zhu, X., Wei, Y., Cheng, X. and Wang, H. (2018). Synergy effects of combined red muds as oxygen carriers for chemical looping combustion of methane. Chem. Eng. J., 341; 588-600.
Feng, Y., Wu, D., liao, C., Deng, Y., Zhang, T. and Shih, K. (2016). Red mud powders as low-cost and efficient catalysts for persulfate activation: Pathways and reusability of mineralizing sulfadiazine. Sep. Purif. Technol, 167; 136-145.
Gowtham, A. and Janani, V. (2017). Study on the effectiveness of red mud on the expansive soil. Int. J. Civ. Eng. Technol., 8(5); 378-385.
Hegedus, M., Sas, Z., Toth-Bodrogi, E., Szanto, T., Somlai, J. and Kovacs, T. (2016). Radiological characterization of clay mixed red mud in particular as regards its leaching features. J. Environ. Radioact., 162-163; 1-7.
Hegedus, M., Toth-Bodrogi, E., Jonas, J., Somlai, J. and Kovacs, T. (2018). Mobility of 232Th and 210Po in red mud. J. Environ. Radioact., 184-185; 71-76.
Huang, Y., Han, G., Liu, J. and Wang, W. (2016). A facile disposal of Bayer red mud based on selective flocculation desliming with organic humics. J. Hazard. Mater, 301; 46-55.
Hu, W., Nie, Q., Huang, B., Shu, X. and He, Q. (2018). Mechanical and microstructural characterization of geopolymers derived from red mud and fly ashes. J. Clean. Prod., 186; 799-806.
Kurtoglu, S.F, Soyer-Uzun, S. and Uzun, A. (2016). Tuning structural characteristics of red mud by simple treatments. Ceram. Int., 42; 17581-17593.
Kucukdogan, N., Aydin, L. and Sutcu, M. (2018). Theoretical and empirical thermal conductivity models of red mud filled polymer composites. Thermochim. Acta, 665; 76-84.
Lemougna, P.N., Wang, K.T., Tang, Q. and Cui, X.M. (2017). Study on the development of inorganic polymers from red mud and slag system: Application in mortar and lightweight materials. Constr. Build. Mater., 156; 486-495.
Li, G., Liu, M., Rao, M., Jiang, T., Zhuang, J. and Zhang, Y. (2014). Stepwise extraction of valuable components from red mud based on reductive roasting with sodium salts. J. Hazard. Mater, 280; 774-780.
Li, R., Zhang, T., Liu, Y., Lv, G. and Xie. L. (2016). Calcification–carbonation method for red mud processing. J. Hazard. Mater, 316;  94-101.
Li, Y.C., Min, X.B., Ke, Y., Chai, L.Y., Shi, M.Q., Tang, C.J., Wang, Q.W., Liang, Y.J., Lei, J. and Liu, D.G. (2018). Utilization of red mud and Pb/Zn smelter waste for the synthesis of a red mud-based cementitious material. J. Hazard. Mater, 344; 343-349.
Liang, G., Chen, W., Nguyen, A.V. and Nguyen, T.A.H. (2018). Red mud carbonation using carbon dioxide: Effects of carbonate and calcium ions on goethite surface properties and settling. J. Colloid Interface Sci., 517; 230-238.
Liu, Y., Naidu, R. and Ming, H. (2011). Red mud as an amendment for pollutants in solid and liquid phases. Geoderma, 163; 1-12.
Liu, Y. and Naidu, R. (2014). Hidden values in bauxite residue (red mud): Recovery of metals. Waste Manag., 34; 2662-2673.
Lui, R.X. and Poon, C. (2016). Utilization of red mud derived from bauxite in self-compacting concrete. J. Clean. Prod., 112; 384-391.
Mane, N. and Rajashekhar, M.S. (2017). Stabilization of Black Cotton Soil by Using Red Mud and Sodium Silicate. Int. Res. J. Eng. Technol., 4(7); 2929-2932.
Nie, Q., Hu, W., Ai, T., Huang, B., Shu, X. and He, Q. (2016). Strength properties of geopolymers derived from original and desulfurized red mud cured at ambient temperature. Constr. Build. Mater., 125; 905-911.
Panda, I., Jain, S., Das, S.K. and Jayabalan, R. (2017). Characterization of red mud as a structural fill and embankment material using bioremediation. Int. Biodeterior. Biodegradation, 119; 368-376.
Pandey, P.K. and Jawaid, S.M.A. (2015). Soil improvement using red mud and flyash. Glob. J. Eng. Sci. Res., 1(12); 7-10.
Perez-Villarejo, L., Corpas-Igiesias, F.A., Martinez-martines. S., Artiaga, R. and Pascual-Cosp, J. (2012). Manufacturing new ceramic materials from clay and red mud derived from the aluminium industry. Constr. Build. Mater., 35; 656-665.
Power, G., Grafe, M. and Klauber, C. (2011). Bauxite residue issues: I. Current management, disposal and storage practices. Hydrometallurgy, 108; 33-45.
Samal, S., Ray, A.K. and Bandopadhyay, A. (2013). Proposal for resources, utilization and processes of red mud in India — A review. Int. J.  Miner. Process., 118; 43-55.
Scribot, C., Maherzi, W., Benzerzour, M., Mamindy-Pajany, Y. and Abriak, N.E. (2018). A laboratory-scale experimental investigation on the reuse of a modified red mud in ceramic materials production. Constr. Build. Mater., 163; 21-31.
Shim, W.G., Nah, J.W., Jung, H.Y., Park, Y.K., Jung, S.C. and Kim, S.C. (2018). Recycling of red mud as a catalyst for complete oxidation of benzene. J. Ind. Eng. Chem., 60; 259-267.
Singh, S., Aswath, M.U. and Ranganath, R.V. (2018). Effect of mechanical activation of red mud on the strength of geopolymer binder. Constr. Build. Mater., 177; 91-101.
Suresh, B., Mukes, S. and Karthikeyan, C. (2018). Soil stabilization using lime. Int. J. Mod. Trends Eng. Sci., 5; 26-28.
Tang, W.C., Wang, Z., Liu, Y. and Cui, H.Z. (2018). Influence of red mud on fresh and hardened properties of self-compacting concrete. Constr. Build. Mater, 178; 288-300.
Toniolo, N.,  Rincon, A., Avadhut, Y.S., Hartmann, M., Bernardo, E. and Boccaccini, A.R. (2018). Novel geopolymers incorporating red mud and waste glass cullet. Mater. Lett., 219; 152-154.
Ujaczki, E., Feigl, V., Molnar, M., Vaszita, E., Uzinger, N., Erdelyi, A. and Gruiz, K. (2016). The potential application of red mud and soil mixture as additive to the surface layer of a landfill cover system. J. Environ. Sci., 44; 189-196.
Wang, W., Chen, W., Liu, H. and Han, C. (2018). Recycling of waste red mud for production of ceramic floor tile with high strength and lightweight. J. Alloy. Compd., 748; 876-881.
Yang, W., Hussain, A., Zhang, J. and Liu, Y., (2018). Removal of elemental mercury from flue gas using red mud impregnated by KBr and KI reagent. Chem. Eng. J., 341; 483-494.
Zarbayani, M., Jorjani, E., Mirmohammadi, M., Shadloo, M.T. and Noaparast, M. (2010). Mineralogical and sink-float studies of Jajarm low-grade bauxite. Int. J. Miner, Metall. Mater., 17(3); 251-256.
Zhang, H., Li, H., Zhang, Y., Wang, D., Harvey, J. and Wang, H. (2018). Performance enhancement of porous asphalt pavement using red mud as alternative filler. Constr. Build. Mater, 160; 707-713.
Zhu, S., Zhu, D. and Wang, X. (2017). Removal of fluorine from red mud (bauxite residue) by electrokinetics. Electrochim Acta,  242; 300-306.
Pollution
Volume 5, Issue 2
April 2019
Pages 411-418

Files

Share

How to cite

Statistics