AlOmar, M. K., Alsaadi, M. A., Hayyan, M., Akib, S. and Hashim, M. A. (2016). Functionalization of CNTs surface with phosphonuim based deep eutectic solvents for arsenic removal from water. Applied Surface Science., 389, 216-226.
Andrew, D., Eugene , W. R. and Lenore, S. (2005). Standard methods for the examination of water and wastewater (Vol. 1). Americane Public Health Association).
Anjum, A., Lokeswari, P., Kaur, M. and Datta, M. (2011). Removal of As (III) from aqueous solutions using montmorillonite. Journal of Analytical Sciences, Methods and Instrumentation., 1(02), 25.
Bang, S., Pena, M. E., Patel, M., Lippincott, L., Meng, X. and Kim, K.W. (2011). Removal of arsenate from water by adsorbents: a comparative case study. Environmental geochemistry and health., 33(1), 133-141.
Barati, A. H., Maleki, A. and Alasvand, M. (2010). Multi-trace elements level in drinking water and the prevalence of multi-chronic arsenical poisoning in residents in the west area of Iran. Science of the Total Environment., 408, 1523–1529.
Bhandari, N., Reeder, R. J. and Strongin, D. R. (2012). Photoinduced oxidation of arsenite to arsenate in the presence of goethite. Environmental science & technology., 46(15), 8044-8051.
Boddu, V. M., Abburi, K., Talbott, J. L., Smith, E. D. and Haasch, R. (2008). Removal of arsenic (III) and arsenic (V) from aqueous medium using chitosan-coated biosorbent. Water Research., 42(3), 633-642.
Bringas, E., Saiz, J. and Ortiz, I. (2015). Removal of As (V) from groundwater using functionalized magnetic adsorbent materials: effects of competing ions. Separation and Purification Technology., 156, 699-707.
Chang, Q., Lin, W. and Ying, W.c. (2010). Preparation of iron-impregnated granular activated carbon for arsenic removal from drinking water. Journal of Hazardous Materials., 184(1-3), 515-522.
Tabatabaei, F.S. et al.
552
Cheng, Z., Fu, F., Dionysiou, D. D. and Tang, B. (2016). Adsorption, oxidation, and reduction behavior of arsenic in the removal of aqueous As(III) by mesoporous Fe/Al bimetallic particles. Water Research., 96, 22-31.
Cornell, R. M. and Schwertmann, U. (2003). The iron oxides: structure, properties, reactions, occurrences and uses. (John Wiley & Sons).
Dhiman, N., Fatima, F., Saxsena, P. N., Roy, S., Rout, P. K. and Patnaik, S. (2017). Predictive modeling and validation of arsenite removal by a one pot synthesized bioceramic buttressed manganese doped iron oxide nanoplatform. RSC Advances., 7(52), 32866-32876.
Guivar, J. A. R., Bustamante D., A., Gonzalez , J. C., A. Sanches , E., Morales, M. A., M. Raez, J. and Arencibia, A. (2018). Adsorption of arsenite and arsenate on binary and ternary magnetic nanocomposites with high iron oxide content. Applied Surface Science., 454, 87-100.
Gupta, A., Yunus, M. and Sankararamakrishnan, N. (2012). Zerovalent iron encapsulated chitosan nanospheres–A novel adsorbent for the removal of total inorganic Arsenic from aqueous systems. Chemosphere., 86(2), 150-155.
Jang M, ChenW, Zou J, Cannon F.s. and Dempsey B. (2010). Arsenic Removal by Iron-Modified Activated Carbon: WERC, a Consortium for Environmental Education and Technology Development at New Mexico State University.
Jian, M., Liu, B., Zhang, G., Liu, R. and Zhang, X. (2015). Adsorptive removal of arsenic from aqueous solution by zeolitic imidazolate framework-8 (ZIF-8) nanoparticles. Colloids and Surfaces A: Physicochemical and Engineering Aspects., 465, 67-76.
Kabay, N., Bundschuh, J., Hendry, B., Bryjak, M., Yoshizuka, K., Bhattacharya, P. and Anac, S. (2010). The global arsenic problem: challenges for safe water production: CRC press.
Lata, S. and Samadder, S. (2016). Removal of arsenic from water using nano adsorbents and challenges: a review. Journal of environmental management., 166, 387-406.
Lee, T. Z. E., Krongchai, C., Lu, N. A. L. M. I., Kittiwachana, S. and Sim, S. F. (2015). Application of central composite design for optimization of the removal of humic substances using coconut copra. International Journal of Industrial Chemistry., 6(3), 185-191.
Litter, M. I., Morgada, M. E. and Bundschuh, J. (2010). Possible treatments for arsenic removal in Latin American waters for human consumption. Environmental Pollution., 158(5), 1105-1118.
Malakootian, M., Mahdizadeh, H., Nasiri, A., Mirzaienia, F., Hajhoseini, M. and Amirmahani, N. (2018). Investigation of the efficiency of microbial desalination cell in removal of arsenic from aqueous solutions. Desalination., 438, 19-23.
Mao, K., Zhang, H., Wang, Z., Cao, H., Zhang, K., Li, X. and Yang, Z. (2019). Nanomaterial-based aptamer sensors for arsenic detection. Biosensors and Bioelectronics., 111785.
Mondal, P., Majumder, C. and Mohanty, B. (2008). Effects of adsorbent dose, its particle size and initial arsenic concentration on the removal of arsenic, iron and manganese from simulated ground water by Fe3+ impregnated activated carbon. Journal of Hazardous Materials., 150(3), 695-702.
Mostafaloo, R., Mahmoudian, M. H. and Asadi-Ghalhari, M. (2019). BiFeO3/Magnetic Nanocomposites for the Photocatalytic Degradation of Cefixime From Aqueous Solutions under Visible Light. Journal of Photochemistry and Photobiology A: Chemistry., 111926.
Nadali, A., Khoobi, M., Nabizadeh, R., Naseri, S. and Mahvi, A. H. (2016). Performance evaluation of montmorillonite and modified montmorillonite by polyethyleneimine in removing arsenic from water resources. Desalination and Water Treatment., 57(45), 21645-21653.
Nasir , A. M., Goh, P. S. and Ismail, A. F. (2018). Novel synergistic hydrous iron-nickel-manganese (HINM) trimetal oxide for hazardous arsenite removal. Chemosphere., 200, 504-5012.
Nemade, P. D., Kadam, A. and Shankar, H. (2009). Adsorption of arsenic from aqueous solution on naturally available red soil. Journal of Environmental Biology., 30(9), 499-504.
Ociński, D., Jacukowicz-Sobala, I., Mazur, P., Raczyk, J. and Kociołek-Balawejder, E. (2016). Water treatment residuals containing iron and manganese oxides for arsenic removal from water–Characterization of physicochemical properties and adsorption studies. Chemical Engineering Journal., 294, 210-221.
Pillewan, P., Mukherjee, S., Roychowdhury, T., Das, S., Bansiwal, A. and Rayalu, S. (2011). Removal of As (III) and As (V) from water by copper oxide incorporated mesoporous alumina. Journal of Hazardous Materials., 186(1), 367-375.
Ristić, M., De Grave, E., Musić, S., Popović, S. and Orehovec, Z. (2007). Transformation of low crystalline ferrihydrite to α-Fe2O3 in the solid state. Journal of molecular structure., 834, 454-460.
Pollution, 6(3): 543-553, Summer 2020
Pollution is licensed under a "Creative Commons Attribution 4.0 International (CC-BY 4.0)"
553
Roy, P., Dey, U., Chattoraj, S., Mukhopadhyay, D. and Mondal, N. K. (2017). Modeling of the adsorptive removal of arsenic (III) using plant biomass: a bioremedial approach. Applied Water Science., 7(3), 1307-1321.
Roy, P., Mondal, N. and Das, K. (2014). Modeling of the adsorptive removal of arsenic :a statistical approach. Journal of Environmental Chemical Engineering., 2(1), 585-597.
Salameh, Y., B. Albadarin, A., Allen, S., Walker , G. and Ahmad, M. N. M. (2015). Arsenic(III,V) adsorption onto charred dolomite: Charring optimization and batch studies. Chemical Engineering Journal., 259, 663-671.
Tajernia, H., Ebadi, T., Nasernejad, B. and Ghafori, M. (2014). Arsenic removal from water by sugarcane bagasse: an application of response surface methodology (RSM). Water, Air, & Soil Pollution., 225(7), 2028.
Usefi, S. and Asadi-Ghalhari, M. (2019). Modeling and Optimization of the Coagulation–Flocculation Process in Turbidity Removal from Aqueous Solutions Using Rice Starch. Pollution., 5(3), 623-636.
Wang, C., Luo, H., Zhang, Z., Wu, Y., Zhang, J. and Chen, S. (2014). Removal of As (III) and As (V) from aqueous solutions using nanoscale zero valent iron-reduced graphite oxide modified composites. Journal of Hazardous Materials., 268, 124-131.
Wang, J., Wei, Y., Zhang, J., Ji, L., Huang, Y. and Chen, Z. (2014). Synthesis of pure-phase BiFeO3 nanopowder by nitric acid-assisted gel. Materials Letters., 124, 242-244.
Wang, J., Xu , W., Chen, L., Huang, X. and Liu, J. (2014). Preparation and evaluation of magnetic nanoparticles impregnated chitosan beads for arsenic removal from water Chemical Engineering Journal., 251, 25-34.
)