Characterization and Applications of Innovative Sn-doped TiO2/AC and PPy-CS/Sn-doped TiO2 Nanocomposites as Adsorbent Materials

Document Type : Original Research Paper

Authors

1 Department of Chemistry, College of Science, Mustansiriyah University, 10052, Baghdad, Iraq. Ministry of Science and Technology, Baghdad, Iraq

2 Department of Chemistry, College of Science, Mustansiriyah University, 10052, Baghdad, Iraq

Abstract

This work explores the synthesis and characterization of two novel nanocomposites that can be used in various applications, such as aqueous solution adsorption of pollutants. The first nanocomposite consists of tin (Sn)-doped titanium dioxide (TiO2) on activated carbon, while the other one consists of polypyrole (PPy), chitosan (CS), and Sn-doped TiO2. A contrast was made of their effective adsorbent materials for the removal of Cibacron Brilliant Yellow dye from aqueous solutions. Different analytical techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), energy dispersive X-ray analysis (EDX), and Fourier transform - infrared (FT-IR) were used to analysis the nanocomposite samples. SEM images show that the average particle diameter of PPy-CS/Sn-doped TiO2 NC is 75 ± 3 nm, while Sn-doped TiO2/AC particles have an average diameter of 40 ± 2 nm. The greater PPy-CS/Sn-doped TiO2 nanocoposite particle diameter indicates that the polymers cover the Sn-doped TiO2 nanoparticles, which leads to higher in the diameter of the particles. The adsorption efficiency of Sn-doped TiO2/AC was higher than that of PPy-CS/Sn-doped TiO2 sample due to its smaller particle size which resulted in a higher surface area which provides more adsorption sites. However, both samples showed remarkable adsorption capacity, where the adsorption capacity of Sn-doped TiO2/AC and PPy-CS/Sn-doped TiO2 were 104 and 103 mg/g, respectively.

Keywords


Alalwan, H. A., Abbas, M. N.and Alminshid, A. H. (2020). Uptake of cyanide compounds from aqueous solutions by lemon peel with utilising the residue absorbent as rodenticide. Indian Chemical Engineer, 62(1), 40-51.
Alalwan, H. and Alminshid, A. (2020). An in-situ DRIFTS study of acetone adsorption mechanism on TiO2 nanoparticles. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 229, 117990.
AL-Ani R. R., Abdul Amir Y. K., and Hussein F. M. (2016). The Influence of Addition of CdS on the Properties of TiO2 Nanoparticle Prepared by Sol-Gel Method.. American Journal of Chemistry. 6(2): 36-46.
Ali, G. A. A., Ibrahim, S. A. and Abbas, M. N. (2021). Catalytic adsorptive of nickel metal from Iraqi crude oil using non-conventional catalysts. Innovative Infrastructure Solutions, 6(1), 1-9.
AL-Mokaram, A. M. A. A., Yahya, R., Abdi, M. M. and Mahmud, H. N. M. E. (2016). One-step electrochemical deposition of Polypyrrole–Chitosan–Iron oxide nanocomposite films for non-enzymatic glucose biosensor. Materials Letters, 183, 90-93.
Boota, M., Anasori, B., Voigt, C., Zhao, M. Q., Barsoum, M. W. and Gogotsi, Y. (2016). Pseudocapacitive electrodes produced by oxidant‐free polymerization of pyrrole between the layers of 2D titanium carbide (MXene). Advanced Materials, 28(7), 1517-1522.
Pollution 2021, 7(2): 445-456 455
Chaudhuri, P., Hess, M., Weyhermüller, T. and Wieghardt, K. (1999). Aerobic oxidation of primary alcohols by a new mononuclear CuII‐radical catalyst. Angewandte Chemie International Edition, 38(8), 1095-1098.
Chen, J., Feng, J. and Yan, W. (2015). Facile synthesis of a polythiophene/TiO 2 particle composite in aqueous medium and its adsorption performance for Pb (ii). RSC advances, 5(106), 86945-86953.
Chen, J., Feng, J. and Yan, W. (2016). Influence of metal oxides on the adsorption characteristics of PPy/metal oxides for Methylene Blue. Journal of colloid and interface science, 475, 26-35.
Dahham, O. S., Hamzah, R., Bakar, M. A., Zulkepli, N. N., Ting, S. S., Omar, M. F. and Dahham, S. S. (2018). Synthesis and structural studies of an epoxidized natural rubber/titania (ENR-50/TiO2) hybrid under mild acid conditions. Polymer Testing, 65, 10-20.
Ghaedi, M., Karimi, F., Barazesh, B., Sahraei, R. and Daneshfar, A. (2013). Removal of Reactive Orange 12 from aqueous solutions by adsorption on tin sulfide nanoparticle loaded on activated carbon. Journal of Industrial and Engineering Chemistry, 19(3), 756-763.
Guo, G. S., He, C. N., Wang, Z. H., Gu, F. B. and Han, D. M. (2007). Synthesis of titania and titanate nanomaterials and their application in environmental analytical chemistry. Talanta, 72(5), 1687-1692.
Kadhom, M., Albayati, N., Alalwan, H. and Al-Furaiji, M. (2020). Removal of dyes by agricultural waste. Sustainable Chemistry and Pharmacy, 16, 100259.
Kalash, K. R., Alalwan, H. A., Al-Furaiji, M. H., Alminshid, A. H., and Waisi, B. I. (2020). Isothermal and Kinetic Studies of the Adsorption Removal of Pb (II), Cu (II), and Ni (II) Ions from Aqueous Solutions using Modified Chara Sp. Algae. Korean Chemical Engineering Research, 58(2), 301-306.
Kalash, K. R., Kadhom, M. A. and Al-Furaiji, M. H. (2019). Short-Cut Nitrification of Iraqi Municipal Wastewater for Nitrogen Removal in a Single Reactor. In IOP Conference Series: Materials Science and Engineering 518(2) 022024.
Kalash, K., Kadhom, M. and Al-Furaiji, M. (2020). Thin film nanocomposite membranes filled with MCM-41 and SBA-15 nanoparticles for brackish water desalination via reverse osmosis. Environmental Technology & Innovation, 20, 101101.
Kim, K. S. (2011). Highly selective adsorption of Hg2+ by a polypyrrole-reduced graphene oxide composite. Chemical Communications, 47, 3942-3944.
Maddodi, S. A., Alalwan, H. A., Alminshid, A. H. and Abbas, M. N. (2020). Isotherm and computational fluid dynamics analysis of nickel ion adsorption from aqueous solution using activated carbon. South African Journal of Chemical Engineering, 32, 5-12.
Mahmoudian, M. R., Basirun, W. J., Alias, Y. and Ebadi, M. (2011). Synthesis and characterization of polypyrrole/Sn-doped TiO2 nanocomposites (NCs) as a protective pigment. Applied Surface Science, 257(20), 8317-8325.
Mekahlia, S. and Bouzid, B. (2009). Chitosan-Copper (II) complex as antibacterial agent: synthesis, characterization and coordinating bond-activity correlation study. Physics Procedia, 2(3), 1045-1053.
Muzzarelli, R. A., Morganti, P., Morganti, G., Palombo, P., Palombo, M., Biagini, G. and Muzzarelli, C. (2007). Chitin nanofibrils/chitosan glycolate composites as wound medicaments. Carbohydrate Polymers, 70(3), 274-284.
Nilchi, A., Dehaghan, T. S. and Garmarodi, S. R. (2013). Kinetics, isotherm and thermodynamics for uranium and thorium ions adsorption from aqueous solutions by crystalline tin oxide nanoparticles. Desalination, 321, 67-71.
Oliveira, D. M. L., Rezende, P. S., Barbosa, T. C., Andrade, L. N., Bani, C., Tavares, D. S. and Severino, P. (2020). Double membrane based on lidocaine-coated polymyxin-alginate nanoparticles for wound healing: In vitro characterization and in vivo tissue repair. International Journal of Pharmaceutics, 591, 120001.
456 Naser et al.
Renjith, R., Bhagysree, J. B., Ulahannan, R. T., Varghese, H. T. and Panicker, C. Y. (2013). FT-IR, FT-Raman and Quantum Chemical Calculations of 1-phenylpyrrole. Oriental Journal of Chemistry, 29(1), 321.
Roosta, M., Ghaedi, M., Daneshfar, A. and Sahraei, R. (2014). Experimental design based response surface methodology optimization of ultrasonic assisted adsorption of safaranin O by tin sulfide nanoparticle loaded on activated carbon. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 122, 223-231.
Rovani, S., Fernandes, A. N., Prola, L. D., Lima, E. C., Santos, W. O. and Adebayo, M. A. (2014). Removal of Cibacron Brilliant Yellow 3G-P Dye from aqueous solutions by Brazilian peats as biosorbents. Chemical Engineering Communications, 201(11), 1431-1458.
Salih, S. S., Mahdi, A., Kadhom, M. and Ghosh, T. K. (2019). Competitive adsorption of As (III) and As (V) onto chitosan/diatomaceous earth adsorbent. Journal of Environmental Chemical Engineering, 7(5), 103407.
Salih, S. S., Mohammed, H. N., Abdullah, G. H., Kadhom, M. and Ghosh, T. K. (2020). Simultaneous removal of Cu (II), Cd (II), and industrial dye onto a composite chitosan biosorbent. Journal of Polymers and the Environment, 28(1), 354-365.
Song, C., Yu, H., Zhang, M., Yang, Y. and Zhang, G. (2013). Physicochemical properties and antioxidant activity of chitosan from the blowfly Chrysomya megacephala larvae. International journal of biological macromolecules, 60, 347-354.
Sun, J., Wang, X., Sun, J., Sun, R., Sun, S. and Qiao, L. (2006). Photocatalytic degradation and kinetics of Orange G using nano-sized Sn (IV)/TiO2/AC photocatalyst. Journal of molecular catalysis A: Chemical, 260(1-2), 241-246.
Zhang, X. X., Bao, M., Pan, N., Zhang, Y. X. and Jiang, J. Z. (2004). IR and Raman Vibrational Assignments for Metal‐free Phthalocyanine from Density Functional B3LYP/6‐31G (d) Method. Chinese Journal of Chemistry, 22(4), 325-332.